百德嘉恒温龙头-H245001

H245001
恒温浴缸龙头
Thermostatic bath-shower mixer

恒温龙头
Thermostatic mixer

恒温浴缸龙头功能说明
恒温衡压淋浴、浴缸龙头一般用于家庭浴室及公共洗浴中心。用户可以根据需要自行调节温度，先设定好所需温度，在出水后5s内就能达到您所需的温度，出水温度恒定为设定温度的±1℃，最大流量能达到16～20L/min,完全满足您的需要。该产品采用法国进口温控棒，恒温效果稳定，当进水温度不变，冷水或热水压力任意变化50%，出水温度变化在设定温度的±1℃内；当进水压力不变，热水供水温度由60℃上升到75℃（5℃/min），出水温度变化在设定温度的±1℃内。冷水失供5s内，出水将自动关闭，能有效避免烫伤

本体材料：铸铜本体 阀芯：温控阀芯 起泡器：Neoperl大流量起泡器 把手材料：塑料手轮
配置：1.5m防缠绕软管 5F手持花洒，操作轻便，舒适好用 Neoperl分水器
表面处理：抛光镀铬，强力耐腐蚀
功能说明： 内装感温元件，利用感温元件原理，自行调节冷热水进水比例进行控温，使其出水温度恒定，从而达到恒温的效果。
使用条件 ：1、工作压力 0.05Mpa—1Mpa 2、理想压力 0.1Mpa—0.5Mpa 超过理想压力要加装减压阀 3、标准压力 动态压力0.3±0.02Mpa
4、冷水供水温度4-29℃ 热水供水温度55-85℃ 建议正常使用温度为55-70℃ 5、常用温度 20-50℃ 6、适用标准 CAS B125-98 ASSE1016 EN1111 AS-4032.1 QB2806-2006

Thermostatic mixer Function Description

Thermostatic and constant pressure bath-shower mixer is generally used in homes and public bath. Users can adjust their own temperature. The temperature needed to be properly configured, it can reach your desired temperature within 5s after water flows out, the outlet water temperature keeps constant fluctuating within the set temperature ± 1 ℃. The maximum flow can reach 16-20L/min, fully satisfied with your needs. The product uses temperature control rods imported from France, temperature are stable, when the inlet water temperature is constant, cold water or hot water pressure can be changed 50%, outlet water temperature changes within the set temperature ± 1 ℃; When the inlet pressure remains unchanged, the resulting hot water temperature ries to 70 ℃ from 60℃(5℃/min), the outlet water temperature changes within the set temperature ± 1 ℃ . Within 5s of the loss of cold water, the outlet water will automatically shut down, which can effectively prevent scalding.
Body material: brass with casting method Valve: temp control valve Aerator: Neoperl Full flow aerator Hand material: plastic handwheel.
Configuration: 1.5m anti-twist shower hose. 5F hand-held shower, easy to operate, comfortable and convenient to use. Neoperl diverter
Surface Finish: chrome plated
Feature description: built-in sensing element, make use of sensing temperature element principle, self-adjusting proportion of hot and cold water to control the temperature so that the outlet water temperature is constant to achieve Thermostatic effect.
Conditions: 1. working pressure 0.05Mpa-1Mpa 2. Recommended pressure: 0.1Mpa-0.5Mpa, if exceed the this pressure, reducing valve should be installed. 3.Rating dynamic pressure 0.3±0.02Mpa
4. Cold supply temp 4-29℃, hot supply temp 55-85℃, recommended temp 55-70℃. 5. working temp 20-50℃ 6. Applicable standard CASB 125-98 ASSE 1016 EN1111 AS-4032.1 QB 2806-2006